DRILL RIG ROTARY TABLES
Opening diameter
444,5 mm ( 17 ½ )
Maximum static torque at the rotor
5000 kgfm
Maximum torque in rotation at the rotor
1000 kgfm
Maximum static load
250 tf
Maximum speed
300 rpm
Overall dimensions L x W x H
~ 2275 x 1270 x 590 mm ( including cardan drive flange )
REQUEST INFORMATION
Opening diameter
520,7 mm ( 20 ½ )
Maximum static torque at the rotor
8000 kgfm
Maximum torque in rotation at the rotor
1600 kgfm
Maximum static load
320 tf
Maximum speed
300 rpm
Overall dimensions L x W x H
~ 2300 x 1410 x 620 mm ( including cardan drive flange )
REQUEST INFORMATION
Opening diameter
698,5 mm ( 27 ½ )
Maximum static torque at the rotor
12000 kgfm
Maximum torque in rotation at the rotor
2800 kgfm
Maximum static load
500 tf
Maximum speed
300 rpm
Overall dimensions L x W x H
~ 2456 x 1750 x 680 mm (including cardan drive flange )
REQUEST INFORMATION
Bearings
Mecanical gear( ring gear + gear shaft )
Gaskets set
REQUEST INFORMATION
REQUEST INFORMATION
Drilling Rotary Table Functions
The drilling rotary table is the element that ensures the transmission of the rotary motion from the rig to the drill string.
The basic functions of the rotary table are:
- Transmitting the rotary motion and the torque required by the drill bit from the rotor by means of the kelly bushing to the kelly located in the upper part of the drill string;
- Taking over the load resulting from the drilling string, respectively the tubing column, by supporting them during the maneuvering operations ( introduction, extraction and rotation of the drilling string when screwing and unscrewing );
- Blocking against the rotation of the drill string, respectively of the tubing column, during the operations of tightening the rods or pipes;
On the website of our drilling rig manufacturer you can choose other kind of high-quality drilling rig spare parts with deliver over around the world.
Drilling Rig Rotary Tables and Their Components from UPET
REQUEST INFORMATION
